SANITARY CONSTRUCTION PRODUCTS  |  Serving North America
Technical support: info@coroundprofiles.com  |  Where to Buy

Rigid PVC Cove Base in White — CoRound® Basic

Is there a rigid PVC cove base for cost-sensitive projects?

The cove base that goes in with the panels. No sealant line required along the wall; pre-formed corners, no silicone-filled field cuts; no resin or cement to cure. CoRound Basic in Pure White 9010 or Sand White 9002 is a rigid PVC cove base system for cost-sensitive projects. It has the CoR 4 cove base for wall-to-wall and wall-to-ceiling junctions and the CoR Skirt B sanitary base for the wall-floor juncture, with pre-formed corner pieces, joints and end caps.

No sealant line required along the wallPre-formed corners, no silicone-filled field cutsNo resin or cement to cureCosts less than the CoRound Seal lineNo welding on site

Talk to a CoRound Specialist

Rendering of the CoRound Basic PVC system on walls that form two inside corners and an outside corner: the sanitary base runs along the bottom of the walls, and the cove base along the top and down one inside corner
A rendering of the CoRound Basic system. The CoR Skirt B sanitary base runs along the floor-to-wall juncture with its joint, corners and end caps. The CoR 4 cove base runs along the top of the walls and down one inside corner. At the top of that corner, a 3-way corner piece joins the two top lengths and the one coming down. At one point, the render shows the bare CoR 4 Base support that the cove base snaps onto.

What Is CoRound Basic?

CoRound Basic is the line for cost-sensitive projects. CoRound Basic in Pure White 9010 or Sand White 9002 is a rigid PVC cove base system. The CoR 4 cove base goes between walls and at the ceiling. The CoR Skirt B sanitary base goes at the floor. CoRound Basic also has pre-formed pieces for corners, joints and ends. The CoR Skirt B sanitary base has flexible co-extruded lips, like the CoR Skirt S. The Basic corner pieces and end caps are PVC without flexible lips. The rounded profile removes the square corner where dirt builds up, and the smooth, non-porous surface is easy to clean.

Why Is No Sealant Line Required Along the Wall?

On ribbed panels, a metal base usually needs a bead of sealant along the wall: a second step, and exposed sealant can turn dark and attract dirt over time, leaving a dark line between a white wall and a white base. With CoRound, no sealant line is required along the wall. On standard cold storage panels with mesa or wide-rib profiles, the flexible lip follows the ribs.

What Is in the System?

  • The CoR 4 cove base, for wall-to-wall and wall-to-ceiling junctions. Flexible co-extruded lips press against both walls, or the wall and the ceiling, and follow small surface irregularities, closing the junction. It snaps onto the CoR 4 Base, a pre-drilled support profile screwed or riveted to the wall or ceiling.
  • The CoR Skirt B sanitary base, for the wall-floor juncture. Flexible co-extruded lips press against the wall and the floor and follow small surface irregularities, closing the juncture. When the CoR Skirt is screwed or riveted, the fasteners sit behind a snap-on cover strip: no exposed screw heads to collect dirt.
  • Corners, joints and end caps. Straight lengths meet at a joint piece, columns take pre-formed outside corners, and each run stops at an end cap at the door: no miter cuts to fill with silicone. Two kinds of 3-way corner join the sanitary base to the cove base, and three lengths of cove base to each other. The curve comes from the factory, not from the installer’s hand: it is the same all the way around the room.

How Does It Hold Up?

In a washdown, water runs from the ceiling down the walls to the floor. With CoRound profiles at the ceiling, in the wall corners and at the floor, it meets a curve, not a square corner, at each junction. Clean the profiles with non-abrasive detergents; the PVC is resistant to common cleaning chemicals. The color runs through the PVC: a hit or a scratch shows the same color, and there is no paint or coating to chip. PVC does not rust. A damaged length can be replaced on its own: the rest of the run stays in place. The first CoRound installations date back to 2010.

How Is It Installed?

Installing CoRound is one pass along the wall: fasten the profile and snap in the corners. There is nothing to mix, trowel, weld or cure, and no sealant line is required along the wall. Tools: tape measure, level, drill and a cutting tool. The panel crew can install the profiles: no separate flooring or welding crew to schedule.

  1. Fasten the CoR 4 Base supports to the walls and ceiling and snap the CoR 4 cove base onto them.
  2. Cut the CoR Skirt B profile to length. Optional, in wet areas: apply a thin bead of neutral silicone behind the flexible lip. At the floor, the CoR Skirt B is screwed or riveted to the wall, or bonded with adhesive: installer’s choice. Screws or rivets go in with the cover strip open. Snap the cover strip of the CoR Skirt B closed by pressing firmly: the fasteners sit behind it.
  3. Corner pieces, joints and end caps press or snap into place. Snap the CoR Skirt B 3-Way Internal Corner into internal corners using its dedicated mounting base.

These instructions are general installation advice: the installer chooses the method that suits the job.

What Works With It?

One system for the whole room: base track, sanitary base or heavy-duty curb, cove base for wall and ceiling junctions, pre-formed corners, end caps and corner guards, all made to fit together. The CoR Skirt snaps into the CoR Channel and is then fastened to the wall: base track and sanitary base are made to fit together. CoRound Corner Protector protects wall corners against everyday bumps from carts and mop buckets.

Where Does It Belong?

Designed for walk-in coolers, food plants and commercial kitchens. Installs on insulated panels, FRP-covered walls, tile, masonry and drywall. In a room already in operation, CoRound can be installed on the finished floor: there is no floor to redo and nothing to cure. PVC is a thermal-break material: it conducts far less heat than metal.

Photos
Hands fastening the CoRound Basic PVC sanitary base to a ribbed wall panel with a drill, its cover strip held open above the screw
Fastening the CoRound Basic sanitary base with a screw, the cover strip held open. Once the strip snaps closed, the fasteners sit behind it.
A hand pressing a CoRound Basic PVC corner piece into place at the ceiling, where the cove base turns around an outside corner above a corner guard
A pre-formed outside corner piece of CoRound Basic snaps into place at the ceiling. It joins the two lengths of cove base along the wall-to-ceiling junctions. Below it, on the outside corner, a CoRound Corner Protector.
Close-up of CoRound Basic PVC cove base along two wall-to-ceiling junctions, turning around an outside corner with a pre-formed corner piece, and a corner guard on the corner below it
At the ceiling, the CoRound Basic cove base turns around an outside corner with a pre-formed corner piece. On the outside corner below it, a CoRound Corner Protector.
CoRound Basic PVC System Components
CodeSizeLengthColorsPacking
CoR 43.9 in developed width13.1 ftPure White 9010, Sand White 9002, Stainless Steel Gray 902325 pcs/box
CoR 4 Base1.2 in13.1 ft—25 pcs/box
CoR 4 Joint3.9 in—Pure White 9010, Sand White 9002, Stainless Steel Gray 9023100 pcs/box
CoR 4 2-Way External Corner3.9 in—Pure White 9010, Sand White 9002, Stainless Steel Gray 9023100 pcs/box
CoR 4 B 3-Way Internal Corner3.9 in—Pure White 9010, Sand White 9002, Stainless Steel Gray 9023100 pcs/box
CoR 4 End3.9 in—Pure White 9010, Sand White 9002, Stainless Steel Gray 9023100 pcs/box
CoR Skirt B3.9 in high13.1 ftPure White 9010, Sand White 9002, Stainless Steel Gray 902310 pcs/box
CoR Skirt B 2-Way Internal Corner3.9 in—Pure White 9010, Sand White 9002, Stainless Steel Gray 902350 pcs/box
CoR Skirt B 2-Way External Corner3.9 in—Pure White 9010, Sand White 9002, Stainless Steel Gray 902350 pcs/box
CoR Skirt B 3-Way Internal Corner3.9 in—Pure White 9010, Sand White 9002, Stainless Steel Gray 902350 pcs/box
CoR Skirt B End Right3.9 in—Pure White 9010, Sand White 9002, Stainless Steel Gray 9023100 pcs/box
CoR Skirt B End Left3.9 in—Pure White 9010, Sand White 9002, Stainless Steel Gray 9023100 pcs/box
CoR Skirt S Joint3.9 in—Pure White 9010, Sand White 9002100 pcs/box
When Should You Choose CoRound Basic?
  • CoRound Basic for cost-sensitive projects; CoRound Seal adds corner pieces and end caps with flexible lips.
  • Choose CoRound Basic in Pure White 9010 or Sand White 9002 for white panel walls.
  • Choose CoRound Basic in Stainless Steel Gray 9023 PVC for rooms with stainless steel panels, tables or equipment.
FAQ

Does CoRound Basic need silicone?
Silicone is optional: not required for installation. The flexible lip minimizes gaps along the wall, with no sealant line required. CoR Skirt: In wet areas, installers can add a thin bead of neutral silicone to help keep water from getting behind the profile.

How is CoRound Basic different from CoRound Seal?
CoRound Basic for cost-sensitive projects; CoRound Seal adds corner pieces and end caps with flexible lips. The CoR Skirt B sanitary base has flexible co-extruded lips, like the CoR Skirt S. The Basic corner pieces and end caps are PVC without flexible lips. Both lines use the CoR 4, CoR 4 Base, CoR 4 2-Way External Corner, CoR 4 End and CoR 4 Joint. The CoR Skirt S Joint also fits the CoR Skirt B; it comes in Pure White 9010 and Sand White 9002 only.

What colors does CoRound Basic come in?
CoRound Basic comes in Pure White 9010 and Sand White 9002. The CoRound Basic PVC line also comes in Stainless Steel Gray 9023, for rooms with stainless steel or Galvalume® walls and equipment. The CoR Skirt S Joint comes in Pure White 9010 and Sand White 9002 only.

How do you install CoRound Basic?
Installing CoRound is one pass along the wall: fasten the profile and snap in the corners. Fasten the CoR 4 Base supports to the walls and ceiling and snap the CoR 4 cove base onto them. At the floor, the CoR Skirt B is screwed or riveted to the wall, or bonded with adhesive: installer's choice. Corner pieces, joints and end caps press or snap into place.

Specifying CoRound for a facility? Our technical team usually responds within one business day.

Email info@coroundprofiles.comCall +1 786 917 8106

Last verified: November 2026

Galvalume® is a registered trademark of BIEC International, Inc.