Preformed Cove Base System in PVC — CoRound® Seal
The cove base that goes in with the panels. No sealant line required along the wall; pre-formed corners, no silicone-filled field cuts; no resin or cement to cure. CoRound Seal is a preformed cove base system in PVC, with pre-formed corner pieces, joints and end caps. The CoR 4 cove base covers wall-to-wall and wall-to-ceiling junctions; the CoR Skirt S sanitary base covers the wall-floor juncture.
No sealant line required along the wallPre-formed corners, no silicone-filled field cutsNo resin or cement to cureRigid PVC with flexible co-extruded lipsNo welding on site

What Is CoRound Seal?
CoRound Seal is a preformed cove base system in PVC. The CoRound Seal line covers the junctions of the room. The CoR 4 cove base goes between walls and at the ceiling. The CoR Skirt S sanitary base goes at the floor. CoRound Seal also has pre-formed pieces for corners, joints and ends. The rounded profile removes the square corner where dirt builds up, and the smooth, non-porous surface is easy to clean.
Why Is No Sealant Line Required Along the Wall?
On ribbed panels, a metal base usually needs a bead of sealant along the wall: a second step, and exposed sealant can turn dark and attract dirt over time, leaving a dark line between a white wall and a white base. With CoRound, no sealant line is required along the wall. On standard cold storage panels with mesa or wide-rib profiles, the flexible lip follows the ribs.
What Is in the System?
- The CoR 4 cove base, for wall-to-wall and wall-to-ceiling junctions. Flexible co-extruded lips press against both walls, or the wall and the ceiling, and follow small surface irregularities, closing the junction. It snaps onto the CoR 4 Base, a pre-drilled support profile screwed or riveted to the wall or ceiling.
- The CoR Skirt S sanitary base, for the wall-floor juncture. Flexible co-extruded lips press against the wall and the floor and follow small surface irregularities, closing the juncture. When the CoR Skirt is screwed or riveted, the fasteners sit behind a snap-on cover strip: no exposed screw heads to collect dirt.
- Corners, joints and end caps. Straight lengths meet at a joint piece, columns take pre-formed outside corners, and each run stops at an end cap at the door: no miter cuts to fill with silicone. One kind of 3-way corner joins the sanitary base to the cove base. The other joins three lengths of cove base. The curve comes from the factory, not from the installer’s hand: it is the same all the way around the room.
How Does It Hold Up?
In a washdown, water runs from the ceiling down the walls to the floor. With CoRound profiles at the ceiling, in the wall corners and at the floor, it meets a curve, not a square corner, at each junction. Clean the profiles with non-abrasive detergents; the PVC is resistant to common cleaning chemicals. The color runs through the PVC: a hit or a scratch shows the same color, and there is no paint or coating to chip. PVC does not rust. A damaged length can be replaced on its own: the rest of the run stays in place.
How Is It Installed?
Installing CoRound is one pass along the wall: fasten the profile and snap in the corners. There is nothing to mix, trowel, weld or cure, and no sealant line is required along the wall. Tools: tape measure, level, drill and a cutting tool. The panel crew can install the profiles: no separate flooring or welding crew to schedule.
- Fasten the CoR 4 Base supports to the walls and ceiling and snap the CoR 4 cove base onto them.
- Cut the CoR Skirt S profile to length. Optional, in wet areas: apply a thin bead of neutral silicone behind the flexible lip. At the floor, the CoR Skirt S is screwed or riveted to the wall, or bonded with adhesive: installer’s choice. Screws or rivets go in with the cover strip open. Snap the cover strip of the CoR Skirt S closed by pressing firmly: the fasteners sit behind it.
- Corner pieces, joints and end caps press or snap into place. Snap the CoR Skirt S 3-Way Internal Corner into internal corners using its dedicated mounting base.
Silicone is optional: not required for installation.
These instructions are general installation advice: the installer chooses the method that suits the job.
What Works With It?
One system for the whole room: base track, sanitary base or heavy-duty curb, cove base for wall and ceiling junctions, pre-formed corners, end caps and corner guards, all made to fit together. The CoR Skirt snaps into the CoR Channel and is then fastened to the wall: base track and sanitary base are made to fit together. CoRound Corner Protector protects wall corners against everyday bumps from carts and mop buckets.
Where Does It Belong?
Designed for walk-in coolers, food plants and commercial kitchens. Installs on insulated panels, FRP-covered walls, tile, masonry and drywall. In a room already in operation, CoRound can be installed on the finished floor: there is no floor to redo and nothing to cure. PVC is a thermal-break material: it conducts far less heat than metal.




Colors (all pieces except CoR 4 Base): Pure White 9010, Sand White 9002
| Code | Size | Length | Colors | Packing |
|---|---|---|---|---|
| CoR 4 | 3.9 in developed width | 13.1 ft | Pure White 9010, Sand White 9002 | 25 pcs/box |
| CoR 4 Base | 1.2 in | 13.1 ft | — | 25 pcs/box |
| CoR 4 S 3-Way Internal Corner | 3.9 in | — | Pure White 9010, Sand White 9002 | 100 pcs/box |
| CoR 4 2-Way External Corner | 3.9 in | — | Pure White 9010, Sand White 9002 | 100 pcs/box |
| CoR 4 End | 3.9 in | — | Pure White 9010, Sand White 9002 | 100 pcs/box |
| CoR 4 Joint | 3.9 in | — | Pure White 9010, Sand White 9002 | 100 pcs/box |
| CoR Skirt S | 3.9 in high | 13.1 ft | Pure White 9010, Sand White 9002 | 12 pcs/box |
| CoR Skirt S 3-Way Internal Corner | 3.9 in | — | Pure White 9010, Sand White 9002 | 50 pcs/box |
| CoR Skirt S 2-Way Internal Corner | 3.9 in | — | Pure White 9010, Sand White 9002 | 50 pcs/box |
| CoR Skirt S 2-Way External Corner | 3.9 in | — | Pure White 9010, Sand White 9002 | 50 pcs/box |
| CoR Skirt S End Right | 3.9 in | — | Pure White 9010, Sand White 9002 | 100 pcs/box |
| CoR Skirt S End Left | 3.9 in | — | Pure White 9010, Sand White 9002 | 100 pcs/box |
| CoR Skirt S Joint | 3.9 in | — | Pure White 9010, Sand White 9002 | 100 pcs/box |
- CoRound Basic for cost-sensitive projects; CoRound Seal adds corner pieces and end caps with flexible lips.
- Choose CoRound Basic in Stainless Steel Gray 9023 PVC to go with stainless steel walls. CoRound Seal comes in Pure White 9010 and Sand White 9002 only.
Does CoRound Seal need silicone?
Silicone is optional: not required for installation. The flexible lip minimizes gaps along the wall, with no sealant line required. CoR Skirt: In wet areas, installers can add a thin bead of neutral silicone to help keep water from getting behind the profile.
What is the Seal Cap, and which CoRound Seal pieces take it?
A cap that covers the fastener holes on the Seal components, so the holes are not left open to collect dirt. Included with the Seal components; also available separately. On CoRound Seal, it goes on the CoR 4 S 3-Way Internal Corner. It also goes on the CoR Skirt S 3-Way Internal Corner, 2-Way Internal Corner, 2-Way External Corner, End Right, End Left and Joint. The CoR 4, CoR 4 Base, CoR 4 2-Way External Corner, CoR 4 End, CoR 4 Joint and CoR Skirt S go on without it.
What colors does CoRound Seal come in?
CoRound Seal comes in Pure White 9010 and Sand White 9002 only. Its cove base, sanitary base, corners, joints and end caps come in both colors. Stainless Steel Gray 9023 PVC is available in the CoRound Basic line.
How do you install CoRound Seal?
Installing CoRound is one pass along the wall: fasten the profile and snap in the corners. Fasten the CoR 4 Base supports to the walls and ceiling and snap the CoR 4 cove base onto them. At the floor, the CoR Skirt S is screwed or riveted to the wall, or bonded with adhesive: installer's choice. Corner pieces, joints and end caps press or snap into place.
How is CoRound Seal different from CoRound Basic?
CoRound Basic for cost-sensitive projects; CoRound Seal adds corner pieces and end caps with flexible lips. Both lines use the CoR 4, CoR 4 Base, CoR 4 2-Way External Corner, CoR 4 End and CoR 4 Joint. The CoR Skirt S Joint also fits the CoR Skirt B; it comes in Pure White 9010 and Sand White 9002 only.
Specifying CoRound for a facility? Our technical team usually responds within one business day.
Last verified: November 2026